[ Identification | Description | Input parameters | Output parameters | Links ]

The Brilliance_monitor Component

Special "Brilliance" monitor.

Identification

Description

If used in the right setting, will output "instantaneous" and "mean" brilliances in units of Neutrons/cm^2/ster/AA/s. Conditions for proper units:


with a source of area 1x1cm illuminating/focusing to an area of 1x1cm a 1m distance, this monitor will output "instantaneous" and "mean" brilliances in units of Neutrons/cm^2/ster/AA/s

Here is an example of the use of the component. Note how the mentioned Unit conditions are implemented in instrument code.

COMPONENT Source = ESS_moderator_long(
   l_low = lambdamin, l_high = lambdamax, dist = 1, xw = 0.01, yh = 0.01,
   freq = 14, T=50, tau=287e-6, tau1=0, tau2=20e-6,
   n=20, n2=5, d=0.00286, chi2=0.9, I0=6.9e11, I2=27.6e10,
   branch1=0, branch2=0.5, twopulses=0, size=0.01)
 AT (0, 0, 0) RELATIVE Origin

COMPONENT BRIL = Brilliance_monitor(nlam=196,nt=401,filename="bril.sim",
	t_0=0,t_1=4000,lambda_0=lambdamin,
	lambda_1=lambdamax, Freq=14)
AT (0,0,0.000001) RELATIVE Source

Input parameters

Parameters in boldface are required; the others are optional.
Name Unit Description Default
nlam 1 Number of bins in wavelength 101
nt 1 Number of bins in TOF 1001
srcarea cm^2 Source area 1
lambda_0 AA Minimum wavelength detected 0
lambda_1 AA Maximum wavelength detected 20
restore_neutron 1 If set, the monitor does not influence the neutron state 0
Freq Hz Source frequency. Use freq=1 for reactor source  
tofcuts 1 Flag to generate TOF-distributions as function of wavelength 0
toflambda 1 Flag to generate TOF-lambda distribution output 0
xwidth m width of monitor 0.01
yheight m height of monitor 0.01
source_dist m Distance from source. Beware when transporting through neutron optics! 1
t_0 us Minimum time 0
t_1 us Maximum time 20000
nowritefile 1 If set, monitor will skip writing to disk 0

Output parameters

Name Unit Description Default
tt_0  
tt_1  
BRIL_N  
BRIL_p  
BRIL_p2  
BRIL_mean  
BRIL_meanN  
BRIL_meanE  
BRIL_peak  
BRIL_peakN  
BRIL_peakE  
BRIL_shape  
BRIL_shapeN  
BRIL_shapeE  
xmin  
xmax  
ymin  
ymax  
ster  
prsec  
dlam  
dt  

Links


[ Identification | Description | Input parameters | Output parameters | Links ]

Generated automatically by McDoc, Peter Willendrup <peter.willendrup@risoe.dk> / Wed Aug 21 11:50:14 2019